background image

 

Important Safety Instructions 

 

 

 

 

 

 

 

Terminals marked the lightning symbol carry electrical current of sufficient magnitude to constitute risk of electric shock. Use only high-
quality cables with plugs pre-installed. All other installation or modification should be performed only by qualified personnel. This symbol, 
wherever it appears, alerts you to the presence of un-insulated dangerous voltage inside the enclosure - voltage that may be sufficient to 
constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the 
accompanying literature. Please read the manual. 

Caution: 
To reduce the risk of electric shock, do not remove the top cover (or the rear section). No user serviceable parts inside. Refer servicing to 
qualified personnel. 

Caution: 
To reduce the risk of fire or electric shock, do not expose this appliance to rain and moisture. The apparatus shall not be exposed to 
dripping or splashing liquids and no objects filled with liquids, such as vases, shall be placed on the apparatus. 

Caution: 
These service instructions are for use by qualified service personnel only. To reduce the risk of electric shock do not perform any servicing 
other than that contained in the operation instructions. Repairs have to be performed by qualified service personnel. 
 
1. Read these instructions. 

2. Keep these instructions. 

3. Heed all warnings. 

4. Follow all instructions. 

5. Do not use this apparatus near water. 

6. Clean only with dry cloth. 

7. Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions. 

8. Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus that produce heat. 

9. Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with one wider than the 
other.  A grounding-type plug has two blades and a third grounding prong. The wide blade or the third prong are provided for your 
safety. If the provided plug does not fit into your outlet, consult an electrician for replacement of the obsolete outlet. 

10. Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the point where they exit 
from the apparatus. 

11. Use only attachments/accessories specified by the manufacturer. 

12 . Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart is used, 
use caution when moving the cart/apparatus combination to avoid injury from tip-over. 

13. Unplug this apparatus during lightning storms or when unused for long periods of time.  

14 . Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, such as 
power supply cord or plug is damaged, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed 
to rain or moisture, does not operate normally, or has been dropped. 

15. The apparatus shall be connected to a MAINS socket outlet with a protective earthing connection. 

16. Where the MAINS plug or an appliance coupler is used as the disconnect device, the disconnect device shall remain readily operable. 

17. Correct disposal of this product: The wheeled bin symbol indicates that this product must not be disposed of with household waste. 
Please refer to the WEEE page of this manual. 

 

 

Summary of Contents for ID48













Reviews: