8
Unit Overview
Front Panel Overview:
1. Input Meters:
Real time LED input meters show level from maximum input level (clip) in 4-segments...
Signal present, 6dB below clipping, 0dB/maximum input level and clip*.
*If analogue input clipping is neared by 1dB, the red input Clip LED will illuminate to show this.
2. Output Meters:
Real time LED output meters show level from the limiter threshold in 4-segments...
Signal present, 6dB below limiter threshold, Limiter threshold and 3dB into limiting.
Note: The red l3 LED will also illuminate if this output is muted.
3. Comms:
ID: Flashes when the ‘ID’ button is clicked on a connected device within the D-Net software.
Master: [for future use]
Activity: Flashes when communication is taking place between the device and D-Net software.
Link: Illuminates when a suitable Ethernet connection is established.
4. Power Light:
Illuminates when a suitable power source is connected and the unit is powered on.
5. USB port:
USB type B port for single unit connection to a computer running the D-Net software.
