9
Rear Panel Overview:
1. Mains Power Inlet, Fuse and Power Switch:
3-pin IEC input, fused [5mm x 20mm, 3.15A, 250V, Anti-Surge (T)], 90-250VAC, 50-60Hz <40W.
A spare fuse is located within the fuse holder – only replace with the correctly rated fuse!
2. Ethernet Computer Control Port:
Neutrik etherCON RJ45 network Ethernet port accepts either a standard CAT5 cable or housed RJ45 connector for
connection to a computer (or suitable network switch to control multiple units simultaneously).
3. Balanced Analogue Audio Outputs:
The analogue outputs are wired as follows:
Pin 1: Shield/Ground
Pin 2: Signal Hot (+)
Pin 3: Signal Cold (-)
4. Balanced Analogue Audio Inputs:
The analogue inputs are wired as follows:
Pin 1: Shield/Ground
Pin 2: Signal Hot (+)
Pin 3: Signal Cold (-)
