5
OPERATION
The E-ACVDRLY-xxx is designed to
close
the circuit between the “
+
“ and “ “ terminals when AC voltage is greater than
50VAC and will open the circuit when AC voltage is less than 45VAC. The “PWR” LED on E-ACVDRLY-xxx will illuminate when
the circuit is closed.
The circuit status can be monitored by the SYSTEM. Each SYSTEM can be configured to send alert notifications when the circuit
opens or closes. Configuration of the E-ACVDRLY-xxx is done on the “Digital Input Configuration” page of the E-16D/5D/2D web
interface and the Configuration page for the listed sensor in the E-MINI-LXO web interface. Configuration for the E-MICRO-
T(RHP) and E-1W(P) is done on the Configure Alert page. A sample configuration page from the web interface for each product
is shown below.
Please refer to the appropriate section of the SYSTEM manual for additional information on the configuration pages.
Configuration page for E-16D/5D/2D or E-MINI-LXO
Configuration page for E-MICRO-T(RHP) or E-1W(P)
