NTI E-AVDS-CELC, Installation And Operation Manual

5 

FEATURES 
 

(1

) Speaker 

(2) 

Microphone 

(3) LED 

7-segment display-

displays the number input,  provides 

i

ndicators for phone numbers, and provides 

indicator for alarm and standby mode. 

(4) “

E1” – “E4” indicators: ON while setting E1-E4 phone/mobile phone numbers. 

 
Note: E1 through E4 indicators will illuminate while setting the password.   
 
 (5) 

Connection Cable 

        red/orange        = 12V 
        black/brown      = Negative (ground) 
        blue/yellow       = Digital Contact wire #1 
        green                = Digital Contact wire #2 

Second cable with RJ11 plug will go into telephone jack  

 
 
(6) 

Buttons: used to enter programming   

GENERAL INFORMATION 
 

Recording Duration: 

20 seconds,  

Telephone numbers and voice message programming remain intact even if the power is OFF. 

 
Telephone Number Storage: 

4 telephone numbers and each can be a maximum of 16 digits. 

 
Second-level Private Password: 

0-6 digit Private Password;   the first three digits can be used to stop alarms and 

the whole password (all six digits) can be used to modify the settings. 

 
Default Password: 

911