6
E-IPCAM-WHNPT-V4 and E-IPCAM-HNPO-P
To access the
E-IPCAM-WHNPT-V4 or E-IPCAM-HNPO-P
web interface to change its settings:
1. Connect the AC adapter to the camera to power it ON. Wait 30 seconds.
2. Connect an Ethernet cable between the camera and an available port on a router (connected to your
network), or directly to a PC.
Note: By default, this camera obtains an IP address from a DHCP server on the local network. To find
the IP address of the camera, consult the DHCP client list on the DHCP server of your wireless router or
use the IP Config tool found in the e-ipcam-whnpt-v4.zip available on our
However, if there is no DHCP server available, or if you are connecting the camera directly with your PC
without another device in-between, use the IP Config tool to discover the IP address.
3. Open a browser (Internet Explorer, Firefox, etc) on that PC and enter the IP found in the client list or in the IP
Config tool.
(If you are not going to change the IP address, you can use that IP address on the
ENVIROMUX "Configure IP Camera" page.)
4. The login window will pop up.
5. Enter the default user name "admin" and default password "admin"
(all lowercase letters).
6. Click
“
Login
”.
You now have access to all internal settings of the camera.
If you make changes to the network settings, you will have to reset
the IP camera and you will be forced to change the password. Please
select a password that is at least 8 characters long, and include a
combination of uppercase letters, lowercase letters, and numbers. Be
sure to make note of the new password.
