NTI MINI SERVER ENVIRONMENT MONITORING SYSTEM
16
Network Settings
The Network Settings screen (see Figure 13) is available only to the administrator or users with administrative privileges. Once
the settings have been changed, press the
Apply
button for changes to take effect. The new settings will take effect immediately
and the user will need to log in again to continue the interface with the ENVIROMUX-MINI. If a mistake has been made and the
user cannot find the ENVIROMUX-MINI by entering the new IP address in the address bar, the Discovery Tool may be used to
locate and correct the address of the ENVIROMUX-MINI (see page 13).
Figure 13- Network configuration page (defaults shown)
Network settings include:
•
MAC Address
factory assigned MAC (Media Access Control) address - no changes are allowed in this field
•
IP Address
unique IP address for the ENVIROMUX-MINI, assigned by the network administrator
(or select “Obtain an IP address automatically” to have a DHCP server assign the IP address)
•
Subnet Mask
for the ENVIROMUX-MINI, assigned by the network administrator
•
Gateway
of the ENVIROMUX-MINI, assigned by the network administrator
•
DNS Server
used by the ENVIROMUX-MINI, assigned by the network administrator
•
HTTP Server Port
can be changed to a secure port channel, assigned by the network administrator
•
Enable SNMP
select to enable SNMP alert message generation
•
SNMP Community
default is "public" or assign per your local needs
•
SNMP Trap Destination
specify the IP Address of the computer that will receive SNMP traps
Note: After any change in Network settings, the ENVIROMUX-MINI will reboot.
