This user’s guide is to be used for
LIP-9020 & LIP-9030 IP Phones
Configured on UCP-100 System
For more info, contact us at:
Normandeau Technologies
INFO@NTILINK.COM
413.584.3131
MAKE AN OUTSIDE CALL
1)
Lift handset and dial 9 for next available line then dial
number
2)
Or press a LOOP button for outside dial tone then dial
number
ANSWER A CALL RINGING AT YOUR STATION
1)
Lift handset or press SPEAKER button for hands free
ANSWER A CALL RINGING AT ANOTHER STATION
1)
Lift handset or press PICKUP soft key button
TRANSFER CALL TO EXTENSION
1)
While on Call press TRANSFER button
2)
Dial the Station number or press pre-programmed flexible
button
3)
Announce Call (supervised transfer only)
4)
Hang up
TRANSFER CALL TO VOICEMAIL
1)
While on Call press TRANSFER button
2)
Press MESSAGE button
3)
Dial the Station number or press pre-programmed flexible
button
4)
Hang up
MAKE AN INTERCOM CALL
1)
Lift handset or press SPEAKER button
2)
Dial the Station number or press pre-programmed flexible
button
PLACE A CALL ON HOLD
Press the HOLD/SAVE button to retain call at your station
RETRIEVE CALL ON HOLD
Press flashing LOOP key on the phone to retrieve your held call
PARK A CALL (System wide hold for others to access call)
1)
Press PARK key
2)
OR Press TRANS/PGM button (or TRANS soft key) then dial
parking bin location number (#601~#610)
3)
Hang up or press SPEAKER button
RETRIEVE PARKED CALL
1)
Press flashing PARK button
2)
OR Lift handset on any Station (or press SPEAKER button)
3)
Dial Parking location number (#601~#610)
PAGE (ALL CALL)
1)
Lift handset
2)
Press Page to call all system phones and overhead speakers
-
w
ait for tone then speak
3)
Hang up
User’s
Guide
