NTI RACKMUX-V
15/17
RACKMOUNT LCD MONITOR WITH KEYBOARD AND MOUSE
25
Figure 27- German keyboard with numeric keypad
PS/2-USB Keyboard/Mouse Mode
The RACKMUX keyboard and mouse can be configured to connect to either a PS/2 or USB enabled CPU. At initial power ON
from the factory, the keyboard will be in PS/2 mode.
To toggle keyboard mouse mode when standard condensed keyboard is present
1. Press the "
Fn
" key twice quickly (double-click). The "Fn" LED will illuminate.
2.
To toggle the keyboard
to USB mode, depress and hold the “
T
” key for at least 7 seconds. The “USB” LED will
illuminate. Release the “
T
” key.
3. To toggle the keyboard back to PS/2 mode, press and hold the “
T
” key again for at least 7 seconds. The “PS/2” LED
will illuminate. (See
Figure
22
on page 13.) Release the “
T
” key.
To toggle keyboard mouse mode when Numeric Keypad is present
1. To toggle the keyboard
to USB mode, depress and hold the “
Fn
“
key (“Fn” LED will illuminate) and the “
T
” key for at
least 7 seconds. The “USB” LED will illuminate. Release both keys.
2. To toggle the keyboard back to PS/2 mode, press and hold the “
Fn
” and “
T
” keys again for at least 7 seconds. The
“PS/2” LED will illuminate. (See
Figure 22
on page 13.) Release both keys.
Note: In the event of a power failure, the RACKMUX will power up the keyboard
in the
mode it was last configured for.
u
Esc
F1
F2
F3
F4
F5
F6
F7
F8
F9
F10
F11
F12
Pause
Untbr
Rollen
=
0 }
)
9 ]
(
8 [
/
7 {
&
6
%
5
$
4
3
"
2
Tab
Alt
Fn
AltGr
Ende
:
.
;
,
Y
X
C
V
B
N
M
A
S
D
F
G
H
J
K
L
Q
@
W
E
R
T
Z
U
I
O
P
Pos1
Bild
Ende
Entf
Einfg
Num
Enter
+
-
*
/
7
8
9
4
5
6
1
2
3
0
.
'
#
Bild
Pos1
Bild
Bild
Einfg
Druck
S-Abf
Entf
?
\
Strg
!
1
2
3
U
*
+ ~
O
A
>
<
^
