NTI UNIMUX 2-Port USB DVI KVM Switch
5
Power Up Sequence
The UNIMUX can be powered at any time. The CPUs can be powered at any time although if a CPU needs a keyboard and/or
mouse at power-ON it should be powered after connecting to and powering-ON the UNIMUX. USB devices (keyboard and
mouse) can be hot plugged to and from the UNIMUX at any time. Remember, the last device attached is the active one.
Limitations
•
Only USB input device or hub cables can be connected to the UNIMUX at the USB Type A female ports labeled "USB
DEVICES". (See Features and Functions on page 2, item 2.)
•
A USB hub (single or multi-port) can be used provided only USB input devices are plugged into it.
•
Only a USB Windows or SUN keyboard or USB mouse may be connected to the USB port on a USB MAC keyboard
•
A maximum of 8 input devices may be connected to the UNIMUX either directly or through hubs.
See Fig. 4 for some examples of input device combinations that can be used with the UNIMUX.
Figure 4- Compatible device combinations
USB Windows Keyboard
USB
Mouse
USB Type A
Male Connectors
USB MAC Keyboard
USB
Mouse
USB
Mouse
USB
Mouse
USB Windows Keyboard
USB Windows Keyboard
Typical Installation- 1 keyboard, 1 mouse
Multiple keyboards and mice
MAC USB keyboard and mouse
USB
Hub
USB MAC Keyboard
USB
Mouse
MAC USB keyboard and mouse through hub
USB
Hub
