NTI Legacy SUN to USB and PS/2 to USB Adapter
6
USB-PS2-R
Connect to a PS/2 CPU.
Note: The CPU or switch should be powered down before connection of the USB-PS2-R.
1.
Connect the green 6 miniDIN male mouse connector to the mouse port on the CPU. (See Fig. 5)
2.
Connect the purple 6 miniDIN male keyboard connector to the keyboard port on the CPU.
Figure 5- Connect to a PS/2 CPU
Connect to a USB Switch
Using a USB2-AB-x-5T cable (x = 3,6,10 or 15 foot cable), connect the USB Type A male connector end to either of the ports
marked 'USB DEVICES" on the adapter. Connect the USB Type B male connector end to a "CPU" port on the NTI UNIMUX USB
KVM matrix switch. (See Fig. 6.)
Figure 6- Connect to a PS/2 CPU
Rear View of PS/2 CPU
Right End View
of USB-PS2-R
6 miniDIN
male connector
6 miniDIN
male connector
