IR Remote Control Setting:
The IR infrared remote control can be used to preset channel selection and other menu functions. Using
the IR remote control, aim at the front panel of the receiver or the external IR receiver cable.
When first using the remote control or after changing the battery in the remote control, the IR remote
control and the equipment Remote ID must be using same ID. The default Remote ID for the transmitter is
7, and for the receiver it is 8.
To set the Remote ID, Press and hold the power button, then press button 8 (for receiver, 7 for the
transmitter) to complete the setting.
+
.
( point away from the transmitter or receiver)
IR Remote Control Button:
Symbol
Button
Receiver Function
Transmitter Function
POWER
Turn Off/On Video Output
Connect/Disconnect Receiver
Setup Remote Control ID
MENU
Menu selection, input numbers after press menu button
UP
Increase Value
DOWN
Reduce Value
LEFT
Carry
RIGHT
Decomposition
ENTER
Enter / Show Channel Information
(When no other Menu is in view)
Enter
ASTERISK
Cancel
NUMBER
Recall Previous Value
A
Favorite Channel Switching
Set RS232 to Auxiliary Mode
to Receive Menu Message
B
Back to Previous Channel
Set RS232 to Extender Mode
1
Number 1
2
Number 2
3
Number 3
4
Number 4
5
Number 5
6
Number 6
7
Number 7
8
Number 8
9
Number 9
0
Number 0
9
