Menu 61
Conflict Check will check the Transmitter channel number at bootup, reconnection and before switching. If channel
number already exists the connection will be interrupted.
Menu 62
Channel Name will show full name instead of number only .
The position of the channel name will be at center of
screen.
The Channel name can set by RS232 command or imported from telnet port.
Menu 75
Message Redirect forwards MENU message to Transmitter RS232 port (Auxiliary mode) instead of OSD.
Menu 76
Command Redirect runs RS232 command from Web or telnet port (Auxiliary mode).
Menu 80~86
With this you can force the selected feature not to follow the channel that is being switched to. This is only available
when free routing is enabled.
For example, you could set the audio to come from Transmitter#2 exclusively by set the audio routing function to 2. When
you do this, and you switch the Receiver to view video from Transmitter#3, you will still hear audio from Transmitter#2.
Default is 0 which means follow the channel number, meaning whatever source (Transmitter) you switch to, that feature
will get its signal from that source.
Menu 90~107
Only available when video wall function is enabled..
Menu 200
This will not backup the parameters of menu function 107 “Save Video Wall”.
Menu 333
This will clear the parameters of menu function 107 “Save Video Wall”.
14
