Video Wall:
Basic Setup
Bezel and Gap Compensation: Set outer width/height of monitor and width/height of viewable area.
OW:
outside width
OH:
outside height
VW:
viewable width
VH:
viewable height
Please note:
1.
The viewable width/height must be less than the outside width/height.
2.
Keep all values at 0 if you do not use this function.
3.
The value is based on millimeter and MUST be an integer.
Wall Size and Position Layout: Set scale of video wall and position of monitor
Vertical monitor count: 1~8
Horizontal monitor count: 1~16 Row position:
0~7
Column position: 0~15
Preferences: Set extension way and rotation
Select the video fit in the screen or stretch out and rotate angle
Apply To:
1.
All: Configure all Transmitters and Receivers in the list.
2.
This (Local): Current device which you are logged into by web browser.
3.
Hosts or Clients: select which Transmitter or Receiver you want to configure.
Show OSD:
Check this box to show receiver’s specific number (follow list order) on the connected monitor
29