P3245-1M
Multimeter digital, True RMS
6
Install/Change the Battery
The multimeter is powered by a 9V
(6F22)
battery.
Warning: To avoid false readings, which could lead to possible electric shock or
personal injury, replace the battery as soon as the low battery indicator
appears. Use only the specified battery type.
Use the following procedure to install or change the battery:
(1)
Ensure that the rotary switch is at the
position.
Remove test leads and any connectors from the input
terminals.
(2)
Turn the device, to see the reverse side.
(3)
Loosen the screw with the included screwdriver and
remove the battery cover.
(4)
Observe the battery polarity indicated inside the battery
compartment, and insert the battery. Change it only
through the same type/build.
(5)
Place the battery cover back in its original position and
tighten carefully the screw.
Caution:
To avoid instruments being damaged from battery leakage, always
remove the battery and store it separately if the multimeter is not going
to be used for a long period.
