P3245-1M
Multimeter digital, True RMS
22
Appendix A: Enclosure
Standard Accessories:
Test lead
K-type
Thermo-
couple
Manual
9V battery
(6F22)
Bolt driver
for changing
the fuse
Appendix B: General Care and Cleaning
Warning: To avoid electrical shock or damage to the multimeter, ensure
that the insides of the casing stay dry at all times.
Cleaning
To clean the instrument exterior, perform the following steps:
Wipe the dust from the instrument surface with a soft cloth. Do not make any scuffing on
the screen when clean the LCD. Clean the instrument with a wet soft cloth not dripping
water. It is recommended to scrub with soft detergent or fresh water. To avoid damage
to the instrument, do not use any corrosive chemical cleaning agent.
Dirt or moisture in the terminals can distort readings. Follow the steps below to clean
your multimeter.
1.
Turn the multimeter off and remove the test leads.
2.
Turn the multimeter over and shake out the dirt of the terminals.
3.
Wipe the contacts in each terminal with a clean swab dipped in alcohol.
