manualshive.com logo in svg

NTT docomo Foma D900i, Manual

The NTT docomo Foma D900i is a cutting-edge mobile device packed with advanced features. Enhance your experience with our comprehensive user manual, available for free download at 88.208.23.73:8080. Get the most out of your device and explore its capabilities with our handy manual.

Share
Download
background image

40

Recharging (continued)

Introduction

C

hecks

Before

Use

You can recharge the battery with the FOMA terminal either closed or open.

•

The battery can only be recharged when it is attached to the FOMA terminal.

•

Be careful not to touch the camera lens.

■

To recharge the battery in the desktop holder

Unfold the power plug from the
AC adapter and plug it into a
100V AC outlet.
Plug the AC adapter connector
into the desktop holder.
Insert the FOMA terminal into
the desktop holder.
Check that recharging starts.

Remove the FOMA terminal from the desktop
holder when recharging is completed.

1

2

3

4

Recharging from a wall outlet

•

Note that recharging may not be performed if the protective cap for the connector is not firmly closed. 

100V AC
outlet

Power
Plug

AC
adapter
connector
(The side 
with the
notes is
face up)

Rear key

Desktop holder

AC adapter

Starting/Ending recharging and other items to note

The battery can be charged regardless of whether the FOMA terminal power is on or off. However,
recharging takes longer with the FOMA terminal power turned on.

•

When recharging is started, the Rear key turns red.
A charging sound is emitted and the Battery Level icon blinks when recharging starts with the FOMA
terminal turned on.

・

If the Rear key does not turn red at the start of charging or it flashes red, recharging is unsuccessful.
If the battery still cannot be recharged even after recharging again, contact your nearest DoCoMo
service center (see p.270).

・

You can set your FOMA terminal to not emit a charging sound (see p.143).

•

When recharging is completed, the Rear key goes off.
A charging sound is emitted and the Battery Level icon is lighted when the battery is charged with the
FOMA terminal power turned on (Recharging is not complete while the Battery Level icon is blinking).

・

You can set your FOMA terminal to not emit a charging sound (see p.143).

•

Do not recharge the battery for an excessive length of time (i.e. longer than a full day) with the FOMA
terminal turned on. The phone uses power so the adapter continues recharging until the FOMA
terminal is unplugged from the adapter. In such a case, the AC or DC adapter charges again but if the
FOMA terminal is removed in the middle of recharging, the following could occur: 

・

Low Battery level

・

Battery alarm sounds

・

FOMA terminal could run out of charge quickly

•

If the battery is sufficiently charged, connecting the FOMA terminal to the AC or DC adapter may not
trigger the recharging process.

•

If the battery is recharged for an excessive length of time with the AC or DC adapter connected, the
ambient temperature may be inappropriate.

Inappropriate ambient temperature. Recharging was
stopped to protect the battery from extreme temperatures.
Move the terminal to a location where the temperature is
between 5°C and 35°C, and recharge again.

Icon

Rear key

Meaning

Recharging: Lights red
Recharged: Goes off

Recharging normally.

Recharging error. Reattach the battery or check that the
adapter is connected correctly.

Goes off

Blinks red

Recharging: Blinks
Recharged: Lights

Summary of Contents for Foma D900i





























































































































































































































































































Reviews:

No comments

Related manuals for Foma D900i

Warner Telecom Group Aspire Quick Reference Manual preview
Aspire
Brand: Warner Telecom Group Pages: 4
Olympia SUN Quick Reference Manual preview
SUN
Brand: Olympia Pages: 88
Palm AT&T Treo 680 Starting Manual preview
AT&T Treo 680
Brand: Palm Pages: 52
Samsung Alltel Hue II SCH-R600 Series Manual Del Usuario preview
Alltel Hue II SCH-R600 Series
Brand: Samsung Pages: 167
Yezz Andy 5T Quick Manual preview
Andy 5T
Brand: Yezz Pages: 5
HTC Desire Z Quick Manual preview
Desire Z
Brand: HTC Pages: 16
Klein Electronics BluPTT-Mini User Manual preview
BluPTT-Mini
Brand: Klein Electronics Pages: 2
Doogee Titans 2 Quick Manual preview
Titans 2
Brand: Doogee Pages: 8
Avaya 1603-I User Manual preview
1603-I
Brand: Avaya Pages: 32
iData 55HC User Manual preview
55HC
Brand: iData Pages: 38
MOB MO9405 User Manual preview
MO9405
Brand: MOB Pages: 4
jcb ToughPhone TP851 PRO TALK User Manual preview
ToughPhone TP851 PRO TALK
Brand: jcb Pages: 35
Talkaphone VOIP-201C3 Configuration And Operation Manual preview
VOIP-201C3
Brand: Talkaphone Pages: 8
Samsung SM-N935FD User Manual preview
SM-N935FD
Brand: Samsung Pages: 153
Samsung SM-N935S User Manual preview
SM-N935S
Brand: Samsung Pages: 153
Zte ZIP Quick Start Manual preview
ZIP
Brand: Zte Pages: 9
ESENE Sayhi 2 Series User Manual preview
Sayhi 2 Series
Brand: ESENE Pages: 66
Panasonic VoiceSonic KX-NT700 Operating Instructions Manual preview
VoiceSonic KX-NT700
Brand: Panasonic Pages: 80

Brands by name

Popular brands

Load more brands