337
Over
se
as Use
Re-searching for the network
<Network re-search>
z
You can re-search for a network then connect to the
network if “NW search mode” is set to “Auto” and
an operator could not be searched for, or if “NW
search mode” is set to “Manual” and you want to
change operators.
1
NW search mode screen (p.336)
“Network re-search” Select an
operator
■
When “NW search mode” is set to “Auto”
“Network re-search”
Setting an operator to be preferably
connected
You can set an operator to be preferably connected
when searching or re-searching the network
automatically.
z
The PLMN network list can store up to 20
operators.
z
Operators designated by DOCOMO are stored to
the PLMN network list.
1
NW search mode screen (p.336)
“PLMN setting”
The “PLMN setting” screen
appears. Operators are
listed in the priority order.
2
Highlight the operator
whose priority is to be
changed
u
(FUNC)
“Change priority”
3
Highlight the position
to move to
d
(Select)
The selected operator moves to the position
above the highlighted item. Select “<last>” to
move to the end.
4
o
(Finish) “YES”
PLMN setting screen (p.337)
PLMN manual select
……
Enters and stores Country
code (Operator Code (MCC)) and Network code
(Operator Code (MNC)).
PLMN select
……
Selects and stores the operator from
the list.
Set VPLMN to PLMN
……
Stores the currently selected
operator.
Change priority
→
p.337
Delete
……
Selects the deleting method from “Delete this/
Delete selected/Delete all”.
“About multiple-choice”
→
p.38
Displaying the Roaming
Operator’s Name
<Display operator name>
You can set whether to display the name of the
currently connected operator on the display during
the international roaming.
1
i
“SETTINGS” “Int’l roaming set”
“Display operator name” “Display
ON” or “Display OFF”
PLMN setting
Function menu p.337
N
z
The priority may not apply depending on the
conditions of radio waves or networks.
N
z
Even when set to “Display ON”, the name of the
operator is not displayed when you are in Japan (in the
FOMA network).
z
When “NW search mode” is set to “Manual” and the
FOMA terminal is in “
” area, “select net” appears.
