26
How to disconnect
Since just closing the browser on your PC may not disconnect, be sure to disconnect by the
following procedure:
1
Double-click the dial-up icon in the task-tray
The connecting screen appears.
For Windows Vista
Open "
"
→
"
接続先
" (Access point)
Select the dial-up currently connected.
2
Click "
切断
" (Disconnect)
When this happens
d
Check the followings if you cannot connect to the network or dial-up successfully.
NOTE
d
The communication speed displayed on the PC may be different from the actual communication speed.
Problem
Points to check
"FOMA SO706i" is not
recognized by the PC.
・
Check if your PC satisfies the required operational environment (p.4).
・
Check if the FOMA communication setting file (drivers) is installed.
・
Check if the FOMA terminal is connected to the PC and the power is turned on.
・
Check if the FOMA USB Cable with Charge Function 01/02 (optional) is firmly connected.
・
Check if the USB mode setting (p.7) is set to "Communication mode".
Unable to connect with the
access point.
・
Check if the settings for the ID (user name) and password are correct.
・
Check if the FOMA USB Cable with Charge Function 01/02 (optional) is firmly connected.
・
If the access point requires the Caller ID, make sure that "184" is not added to the phone
number.
・
Check if the box of "
フロー制御を使う
" (Use the flow control) of the modem property is
checked.
・
Check if the APN is set correctly.
・
If you still cannot connect to the other end after checking the above, consult with the Internet
service provider or network administrator about the setting method.
Dial-up icon
