158
Camer
a
2
Locate the JAN/QR code at the center of the display and press
(Scan).
Ｓｃａｎｎｉｎｇ
Ｓｃａｎｎｉｎｇ
Ｆｉｘ ｃａ ｍ ｅｒａ
Ｆｉｘ ｃａ ｍ ｅｒａ
The scanning of the JAN/QR code starts.
When the scanning is completed, the end sound is heard and the data
that has been scanned is displayed in the normal display.
To save scanned data such as a phone number
Move the cursor to data such as a phone number and from the
Function menu, select [Add to phonebook]
→
[Yes] and save the
scanned data in the Phonebook.
Follow the same steps as in “Add to FOMA terminal phonebook” (P.91, step
3 to 6) or “Add to UIM phonebook” (P.93, step 3 to 4).
To save a scanned URL as a bookmark
Move the cursor to the URL and from the Function menu, select [Add
bookmark]
→
[Yes]
→
a folder.
3
Press
(Save).
The data from the scanned JAN/QR code is saved.
●
Some QR codes allow you to save data such as a name, phone number, and mail address all at once in the
Phonebook just by scanning them.
●
When scanned characters cannot be entered in the text editing display, they are replaced with as many
spaces (blanks).
●
A scanned image may not be saved depending on its image or file size.
Displaying the Saved Data
You can save up to 10 data entries for JAN or QR codes that are scanned.
When a total of 10 data entries is saved and a new JAN/QR code is scanned, unprotected data is overwritten
from the oldest.
1
From the Menu, select [LifeKit]
→
[Bar code reader]
→
[Saved data] and press
.
Ｄａｔａ ｌｉｓｔ
２００７／１１／１４ １３：５６
２００７／１１／０７ ２３：１３
２００７／１０／２８ １４：２５
２００７／１０／２８ １０：４２
２００７／１０／２３ １６：２１
２００７／１０／１２ １３：２９
２００７／１０／０３ １９：２８
２００７／１０／０３ ０９：４７
２００７／０９／３０ １４：０５
２００７／０９／３０ １３：５０
To delete data
Move the cursor to the data and from the Function menu, select
[Delete]
→
[Delete one]
→
[Yes]. To delete several data, from the
Function menu, select [Delete]
→
[Select&delete], select data, press
(Complete), and then select [Yes]. To delete all data, from the
Function menu, select [Delete]
→
[Delete all], enter the Security code,
and select [Yes].
To protect data
Move the cursor to the data and from the Function menu, select
[Protect ON/OFF]
→
[Yes]. “
” changes to “
”.
2
Select the data and press
.
２００７／１１／１４ １３：５６
Ａｄｄ ｔｏ ｐｈｏｎｅｂｏｏｋ
Ｎａｍｅ：ＤｏＣｏＭｏ Ｔａｒｏ
Ｒｅａｄｉｎｇ：ＤｏＣｏＭｏＴａｒｏ
ＴＥＬ：０３ＸＸＸＸＸＸＸＸ
Ｅ−ｍａｉｌ：ｄｏｃｏｍｏ．ｔａｒｏ．
△△
＠
ｄｏｃｏｍｏ．ｎｅ．ｊｐ
