186
Selecting to Receive i-mode
Mail
<Receive
option>
You can check through mail held at the i-mode center,
where you can select mail to receive and delete mail
without receiving it based on the information such as
mail subject. To use this function, set the Recv option
setting to [ON]. When the Recv option setting is set to
[ON], i-mode mail is not received automatically.
When the Recv option setting is set to [ON], the Mail tone
does not sound and when the Manner mode or Vibrator is set,
the vibrator does not operate.
Ｍａｉｌ ａｔ ｃｅｎｔｅｒ
When receiving mail, the notification
icon “
” (Mail at center) appears.
To check mail
Press
(Link) in the stand-by
display and select “
”
→
[Yes].
The FOMA terminal is connected
to the i-mode center.
Receiving i-mode Mail after Selecting
Connect to the i-mode center and select mail to
receive.
When 2in1 is set to the B mode, the Receive option cannot be
performed.
1
From the Mail menu, select [Receive option] and
press
.
ﾒｰﾙ選択受信
（１／２ﾍﾟｰｼﾞ）
−−−−−−−−
選択受信説明
[１]保留
０７／１１／１２ １７：５４
Ｓｏｒｒｙ ｆｏｒ ｄｅｌａｙ
ｄｏｃｏｍｏｔａｒｏ＠
△△
．□□□．ｃｏ．ｊ
ｐ
サイス゛：１．３Ｋハ゛イト
The call is connected to the i-mode center and the list of
i-mode mail saved at the center appears.
When the mail contains a file attachment, the following
icons appear.
Still image file attachment
i-motion attachment
Melody attachment
ToruCa card attachment
Other file attachment
2
Select [
保留
] (Holding) for the mail and press
.
[
受信
] (Receive):
Receive a selected i-mode mail.
[
削除
] (Delete):
Delete a selected i-mode mail.
[
保留
] (Holding):
Hold a selected i-mode mail at the i-mode center.
3
Select [
受信
] (Receive) and press
.
4
Select [
受信
/
削除
] (Receive/Delete) and press
.
１／２ﾍﾟｰｼﾞまで選択したﾒｰﾙ
を
受信／削除
−−−−−−−−
ｉﾓｰﾄﾞｾﾝﾀｰから全てのﾒｰﾙを
削除
To delete all mail
Select [
削除
] (Delete) below [
ｉモードセンターから全て
のメールを
] (All mail from the i-mode center).
5
Select [
決定
] (OK) and press
.
The selected mail is received.
Checking New i-mode Mail
<Check new message>
New mail held at the i-mode center while the FOMA
terminal is powered off or outside of the i-mode service
area can be checked.
Depending on the radio wave condition, you may not be able
to check new mail.
1
Press
(Mail) for over a second in the stand-by
display.
The FOMA terminal is connected to the i-mode center, and
an inquiry result is displayed.
To check mail
Select [Mail].
