220
Osaifu-K
eitai/T
or
uCa
What is Osaifu-Keitai?
“Osaifu-Keitai” provides convenient i-mode functions
(i-mode FeliCa) that can be performed using the IC
card inserted in an i-mode terminal.
FeliCa adopts a contactless IC card technology that
enables data to be read/written just by scanning.
You can simply hold up your Osaifu-Keitai to a reading
device in stores that provide the FeliCa service to pay
using e-money, or use it as an airplane ticket or point
card. With features like Osaifu-Keitai, your mobile
phone becomes an increasingly handy tool.
This latest FeliCa is even more convenient to use
compared with previous versions of the FeliCa-
compatible contactless IC card. For example, you
can deposit e-money in Osaifu-Keitai on the IC card,
and check the balance and purchase history using
communications.
※
To use Osaifu-Keitai-compatible services, you need to make
the necessary settings using i-
α
ppli software (IC appli)
supporting IC card function (check with IP (information
service providers) for more details).
※
For precautions on the use of each Osaifu-Keitai-compatible
service, see the “Mobile Phone User’s Guide
【
i-mode
】
FOMA
version”.
●
The data on the IC card could be lost/changed due to
an Osaifu-Keitai trouble (Note that, as a rule, when your
Osaifu-Keitai is left with us such as for repairs, we can
take it only when all data is deleted. Therefore, you are
requested to delete the data yourself). You are requested
to use the backup services provided by IP (information
service providers) to support for reissuing, restoring,
holding temporarily, or transferring data except transferring
data by the iC transfer service. Check with IP (information
service providers) whether the backup service is provided,
for the usage conditions (such as necessary prior
procedures or fees), or whether the iC transfer service
is supported beforehand because those vary from one
service to another. Please make sure to use the services
supporting the backup services for important data.
●
DoCoMo shall not be liable for any data loss/change of the
information saved on the IC card or any damage occurred
relating to using Osaifu-Keitai-compatible services
regardless of any reasons such as trouble or changing to
another FOMA terminal.
●
If you should lose the Osaifu-Keitai or have it stolen,
immediately contact the Osaifu-Keitai-compatible service
provider you use for operations which have to be done in
this situation. For this FOMA terminal, both the Omakase
Lock (P.127) and IC card lock (P.226) can be used.
What is the iC transfer service?
The iC transfer service
※
1 is a service provided for
transferring all data stored on the IC card at once
※
2
to a new Osaifu-Keitai
※
3 when the Osaifu-Keitai
is replaced such as for changing to another FOMA
terminal or trouble repair. Once the data stored in the
IC card is transferred to the new Osaifu-Keitai, you
can use Osaifu-Keitai-compatible services by simply
downloading the Osaifu-Keitai-compatible i-
α
ppli.
You can use the iC transfer service at our service
counter of your local DoCoMo shop, etc.
For details, see the “Mobile Phone User’s Guide
【
i-mode
】
FOMA version”.
※
1 There is a processing charge for the use of the iC transfer
service. (There are some cases where no charges
apply.) Packet communication charges apply for IC appli
downloads and various settings.
※
2 There are some Osaifu-Keitai-compatible services that do
not support the all data transfer function. Unsupported
services are deleted when you use the iC transfer service.
Therefore, utilize the backup service of each Osaifu-Keitai-
compatible service or delete them before you use the iC
transfer service.
※
3 The iC transfer service can be used only the Osaifu-Keitai
where the data is transferred to has to be the compatible
model with the iC transfer service.
Starting an Osaifu-Keitai-
compatible i-
α
ppli
You have access to useful functions, for example,
reading/writing data on the IC card using an Osaifu-
Keitai-compatible i-
α
ppli in order to deposit e-money
(such as train ticket deposit) or look up the balance or
purchase history from the mobile phone.
When you start an Osaifu-Keitai-compatible i-
α
ppli software
for the first time or download one, the message “Current
UIM necessary to use IC card?” appears. If you select [Yes],
you cannot use the IC card function without inserting the
associated UIM.
When you use the FOMA terminal with another UIM, you once
need to delete all Osaifu-Keitai-compatible i-
α
ppli software
with the associated UIM inserted in the FOMA terminal to use
the IC card function.
1
From the Menu, select [Osaifu-Keitai]
→
[IC card
content] and press
.
ＩＣ ｃａｒｄ ｃｏｎｔｅｎｔ １／２
ケータイクレシ゛ット「ｉＤ」
ＤＣＭＸクレシ゛ットアフ゜リ
Ｓｅａｒｃｈ ｂｙ ｉ−ｍｏｄｅ
2
Select the software and press
.
The software is started up and “
” or “
” appears.
