352
Netw
or
k Ser
vices
Using 2in1
You can separately use two phone numbers, 2 mail
addresses, and exclusive modes for each on your
FOMA terminal as if you have two terminals.
For the default settings, see the List of menus (P.380).
Mode
Description
A mode
You can dial with your phone number (Number
A), send i-mode mail with Address A, and
browse related data.
B mode
You can dial with 2in1 phone number (Number
B), access to sites where WEB mail is available
with Address B, and browse related data.
Dual mode
The mode that supports both functions of A and
B modes.
Sending/receiving mail for Address B is performed on the
specified WEB mail site.
Packet communication in B mode is available while
subscribing to the i-mode service.
For details on 2in1, see the “Mobile Phone User’s Guide
【
2in1
】
”.
When you replace the UIM (From 2in1 subscriber to 2in1
subscriber) while 2in1 is used, to obtain a correct Number B,
you need to perform the 2in1 function OFF (P.353) first, and
then set the 2in1 to ON again.
When you replace the UIM (From 2in1 subscriber to 2in1 non-
subscriber), perform the 2in1 function OFF.
When placing a voice/videophone call or originating 64K data
communication from an external device, if 2in1 is set to either
the A mode or Dual mode, it is done by Number A. When the
B mode is set, it is done by Number B.
Setting 2in1
You can set the operations such as the Stand-by
display and Receive avoid. setting by setting the ON
for 2in1.
1
From the Menu, select [Settings]
→
[Management]
→
[NW Services]
→
[2in1 setting] and press
.
The Security code screen appears.
The 2in1 setting display also appears by pressing
for over a second in the stand-by display.
2
Enter the Security code and press
(OK).
When 2in1 is already set to ON
The 2in1 setting display appears.
3
Select [Yes] and press
.
２ｉｎ１ ｓｅｔｔｉｎｇ
Ｍｏｄｅ ｓｗｉｔｃｈｉｎｇ
Ｐｈｏｎｅｂｏｏｋ ２ｉｎ１ ｓｅｔｔｉｎｇ
Ｓｔａｎｄ−ｂｙ ｄｉｓｐｌａｙ
Ｓｅｔ ｃａｌｌ／ｒｅｃｅｉｖｅ Ｎｏ．
２ｉｎ１ ｆｕｎｃｔｉｏｎ ＯＦＦ
Ｒｅｃｅｉｖｅ ａｖｏｉｄ． ｓｅｔｔｉｎｇ
2in1 is set to ON and the 2in1 setting display appears.
4
Set each item.
Menu
item
Operation
Mode
switching
Switch the 2in1 modes.
Select [Mode switching]
→
[A mode]/[B mode]/[Dual
mode].
Phonebook
2in1 setting
Change the 2in1 settings saved for the Phonebook.
When an entry is saved in the Phonebook, the
Phonebook 2in1 setting compatible with the 2in1
mode is automatically saved.
●
Set each entry
Select [Phonebook 2in1 setting]
→
phonebook
data
→
(Set)
→
Select [A]/[B]/[Common].
●
Set for a group
Select [Phonebook 2in1 setting]
→
(Func)
→
Select [Set all groups]
→
a group
→
(Set)
→
Select [A]/[B]/[Common].
Stand-by
display
Set the stand-by display for the B and Dual modes.
Select [Stand-by display]
→
[B mode]/[Dual mode]
→
an image from My picture of the Data Box.
You can set the following files.
Category
File format
File size
Image size
My picture
GIF/JPEG Max. 250K
bytes
Max. [Stby
(480×864)],
Max. W480×
H288 for GIF
animation
SWF
Max. 100K
bytes
−
To specify no image, select [None].
