17
When Using Other Providers
1
Start the FOMA PC setup software and click [
かん
たん設定
].
2
Select [64K
データ通信
] for the connection type and
click [
次へ
].
3
Select [
その他
] for the host and click [
次へ
].
4
Enter dial-up information.
About whether you should notify your caller ID, follow the
instruction of the provider you use.
[
接続名
]:
Enter a host name (any name).
You cannot enter half-width characters, “¥” “/” “:” “
＊
”
“?” “<” “>” “|” “”” and “!”.
[
モデムの選択
]:
Select [FOMA SO905i].
[
電話番号
]:
Enter the line phone number of your provider.
E n t e r i n f o r m a t i o n s u p p l i e d b y y o u r p ro v i d e r
accurately.
■
Advanced setting (Setting of TCP/IP)
When you click [
詳細情報の設定
], the setting window of [IP
アドレス
] and [
ネームサーバー
] appears. If any entries are
required as information for dialing up to your provider or
office LAN, enter the appropriate addresses according to
the provided instructions.
5
Click [
次へ
].
6
Set [
ユーザ
ID] and [
パスワード
] and click [
次へ
].
To set [
ユーザ
ID] and [
パスワード
], enter the appropriate
information supplied by your provider accurately with
careful attention to the letter case.
7
Check the setting information and click [
完了
].
8
Click [OK].
Starting the Communication You Just
Finished Setting Up
Connect the FOMA terminal to a PC before starting this
operation.
1
Double-click the connection icon on the
desktop.
The communication starts.
To start from the Start menu
Click [
スタート
]
→
[
接続先
] and select [
すべて
] at [
表示
].
Select a dial-up connection and click [
接続
].
2
Enter [
ユーザー名
] and [
パスワード
], and click [
ダ
イヤル
].
You can connect with [
ユーザー名
] and [
パスワード
] left
blank when using “mopera U” or “mopera”.
When you allow the users other than yourself to connect
Put a checkmark for [
次のユーザーが接続するとき使
用するために、このユーザー名とパスワードを保存す
る
] (Save this user name and password so that they
can be used for further connections by other users)
a n d s e l e c t [
このコンピュータを使うすべてのユー
ザー
] (All users who use this computer).
The connection is established.
●
The communication speed displayed on a PC may be
different from the actual communication speed.
●
A n i c o n a p p e a r s o n t h e F O M A t e r m i n a l d u r i n g
communication.
During packet communication (no data transmission)
Ｃｏｎｎｅｃｔｉｎｇ
During packet communication (with data transmission)
Ｓｅｎｄｉｎｇ／ｒｅｃｅｉｖｉｎｇ
During 64K data communication
Ｃｏｎｎｅｃｔｉｎｇ ６４Ｋ ｄａｔａ
