66
V
o
ice/Videophone Calls
Putting a Call on Hold during a Call
<Holding>
The call can be put on hold during a voice or videophone call so that your voice cannot
be heard by the recipient.
Even if the call is put on hold, the caller is charged for the call.
1
Press
(Func) during a call, select [Holding], and press
.
Both you and the recipient hear the melody “Hamabe no uta”. During a videophone call, a
preinstalled image is sent to the recipient.
To cancel the Holding
Press
.
Putting a Call on Hold
<On
hold>
If you cannot answer a voice or videophone call immediately, you can put the call on
hold.
Even if the answer is put on hold, the caller is charged for the calling charge.
Example: Putting a voice call on hold
1
When receiving a call, press
(HLD).
Ｃａｌｌ ｄｕｒａｔｉｏｎ ０：０３
Ｏｎ ｈｏｌｄ
The answer is put on hold.
The guidance to inform the caller that you are currently unable to answer
the call is played back. During a videophone call, a preinstalled image
is sent to the recipient.
If you press
while the call is put on hold, the call on hold is disconnected.
2
When ready to answer the call, press
.
The On hold is canceled and you can talk.
●
If you have signed up for the Voice Mail or Call Forwarding Service, you can select [FWD to Voice Mail] or [Call
Forwarding] from the Function menu while you are receiving a call, in order to use those services.
Using the Public Mode (Drive Mode)
<Public mode (Drive mode)>
The Public mode is an automated answering service which takes into account the
manners in highly public places. When the Public mode is set, the guidance is played
back to inform the caller that you are unable to answer the call because you are driving
or in a place where talking on a mobile phone should be avoided (trains, buses, or movie
theaters), and then the call is disconnected.
The Public mode can be set or canceled even if “
” is displayed.
The Public mode cannot be used during data communication.
