40
Before Using the Terminal
After start of charging with Battery Care,
charging pauses once short of full charge.
And then charging resumes near estimated
full charge time to be on time for full charge.
■
Switching to normal charging
･
To turn off Battery Care charging, from the
Home screen, tap [apps folder]
u
[Settings]
u
[Battery]
u
[Battery Care]
u
of "Use Battery Care".
･
To temporarily stop Battery Care charging
and switch to normal charging, drag the
status bar down and tap the notification
of Battery Care charging.
❖
Note
･
It may take 7 days or more to complete learning your
habit.
･
If regularity in your charging habit cannot be found,
Battery Care does not start because incomplete of
the learning and normal charging will be performed.
･
If you remove charging equipment during Battery
Care charging, the terminal may not be fully charged.
To charge the battery using the Desktop
Holder SO27 (optional) and AC Adapter 07
(optional), operate the following steps.
･
3 types attachments (52B/60A/60B) are
supplied to the desktop holder. Use the
suitable attachment depending on the
thickness of the terminal. Placing the terminal
on the desktop holder without the
attachment on it may damage the USB Type-
C jack or other parts.
･
When you do not attach a commercially
available case or cover to the terminal, attach
the Attachment 52B (P.42) to the desktop
holder to use.
1
Insert a Type-C plug of the AC
adapter into the charging jack on
the back of the desktop holder.
Charging with desktop holder
Summary of Contents for SO Series
Page 1: ...18 10 INSTRUCTION MANUAL ...
