13
TROUBLESHOOTING - CAUSES AND SOLUTIONS
PROBLEM
CAUSE
SOLUTION
The paint drips on the object
to be painted
Product too diluted
Add undiluted product
Sparay adjustemennt
Reduce the paint flow by tightening the screw
(
H - 1
)
Movement too slow
Move the gun faster
Gun trigger remains pulled
When reversing the movement, let go of the trigger
Gun distance
Increase the distance between gun and the object
Paint application weak or
irregular
Paint too duluted
Add thinner
Sparay adjustemennt
Increase the amount of paint by using the screw
(
H - 1
)
Movement too fast
Move the gun more slowly
Gun clogged
Clean the gun. Clean the internal nozzle ( (
M - 3
)
with
a non-metallic object
Gun distance
Decrease the distance between gun and the object
No paint coverage
Paint not thinned enough
Add thinner
Paint too thick, viscosity
too high
Check the viscosity of the product
Gun clogged
Clean the gun. Clean the internal nozzle ( (
M - 3
)
with
a non-metallic object
Hose burst or broken
Change the hose
Air filter clogged
Change the filter
Col grainy paint
Filter the paint, if necessary, using a filter or a screen
Reservoir poorly closed
Clean the gasket and close the reservoir
For safety reasons and to ensure correct operation, the reservoir is not hermetically sealed.
Even after it is completely closed, a small flow of air may still be present.
Graffity - HVLP 600W
GB
Power supply
Rated power
Working
pressure
Air intake
Pipe length
Spray gun
tank capacity
Weight
230 V
50 Hz
600 W
0,15 - 0,35 bar
1650 l/min
190 cm
~ 1 L
3,2 Kg
