5
Isolation - Before commencing work make sure that the unit,
switched live and Nuaire control are electrically isolated
from the mains supply and switched live supply.
7.0 Maintenance/Cleaning
1.
We recommend that the two G2 fiters are inspected after
6 months, and replaced every 12 to 18 months.
2.
Remove the front cover and slide out the filters which are
fitted either side of the heat exchanger, return or replace
them as necessary.
3.
Inspect the heat exchanger every 5 years. Generally check
for damage and security of components. Refit cover.
4.
Inspecting motors. Motors can be accessed through
removal side panels.
02. 07. 15. Leaflet Number 671437
8.0 Replacement of Parts
Should any component need replacing Nuaire keep extensive
stocks for quick delivery. Ensure that the unit is electrically
isolated, before carrying out any work.
When ordering spare parts, please quote the serial number
of the unit and the ARC number of the purchase if possible.
(This information will be available on the fan label).
9.0 Warranty
The 5 year warranty starts from the day of delivery and
includes parts and labour for the first year and parts only for
the remaining 4 years. This warranty is conditional on planned
maintenance being undertaken
.
10.0 Service Enquiries
Nuaire can assist you in all aspects of service. Our Technical
Support department will be happy to provide any assistance
required.
Telephone 029 2085 8400
Installation and Maintenance
MRXBOX95-WALL Mechanical Ventilation with Heat Recovery
Technical or commercial considerations may, from time to time, make it necessary to alter the design, performance and
dimensions of equipment and the right is reserved to make such changes without prior notice.
