1
Leaflet Number 671051 January 2012
XS Wall Fan Kits
Supply/Extract Units
Installation and Maintenance
Introduction
The Nuaire XS Wall Fan Kit is available in 6, 9 and 12 inch
impeller sizes suitable for supply or extract and can be the
heart of a room’s automatic ventilation system.
Ensure adequate air replacement for the fan and any fuel
burning appliance in the room.
Switching
Operated via a separately wired 3 amp fused spur (by others)
or operated via the optional XS-MFC remote controller allowing
supply or extract, variable speed and automatic or manual
switching of several fans if desired.
Sensors
Sensors are available as remote units or integral ‘plug in’ units.
They are able to control multiple fans, depending on sensor and
fan types. Integral sensors are quick and easy to install and
are aesthetically pleasing, whilst remote sensors give the
benefit of location close to the pollutant source.
Remote sensors can be fitted with an optional security strap to
prevent unwanted tampering.
General
The removable interior grille provides easy access while the
external rotor motor makes for simple removal of the push-on
impeller for cleaning. Upward angled interior grille vanes shield
workings from view and downward sloping external vanes
throw off rain. The fan is IP24 splash proof approved with the
motor rated at IP44.
All external components are made in soft grey colours from
ultra violet stable ABS material so they will blend with most
decors and will not fade in sunlight.
Coding for Wall Fan Kits
Description
Code
6 inch Wall Fan kit complete
XS6WA
9 inch Wall Fan kit complete
XS9WA
12 inch Wall Fan kit complete
XS12WA
Wall Fan Kits are supplied as a complete package with all
wall installation parts included.
The EMC Directive
2004/108/EC
The Low Voltage
Directive
2006/95/EC
Nuaire Limited
Western Industrial Estate Caerphilly United Kingdom CF83 1NA
T: 029 2088 5911 F: 029 2088 7033 E: info@nuaire.co.uk W: www.nuaire.co.uk
Outer grille
Wall sleeve
Fan assembly
Inside grille
269 mm
134 mm*
269mm
137 mm*
128mm
272mm
Front view XS6WA (6 inch)
XS9WA (9 inch)
XS12WA (12 inch)
Rear view
Side view
Cable entry
Aperture required
260 x 260mm sq.
*To centre of
'duct'
337 mm
171 mm*
342mm
175mm*
130mm
342mm
Cable entry
*To centre of
'duct'
413mm
206 mm*
420mm
214 mm*
169 mm
420mm
Cable entry
*To centre of
'duct'
Aperture required
330 x 330mm sq.
Aperture required
410 x 410mm sq.
Dimensions
Fig 2.
Fig 1 Main components of Wall Fan Kit.
