NuAire BOXER B815H Series, Installation, Operation & Maintenance Instructions Manual

nuaire.co.uk 

029 2085 8200

BOXER BPS 

ECOSMART CLASSIC CONTROL (ES)

nuaire.co.uk 

029 2085 8200

12.13 MAINTENANCE SCHEDULE

Every 3 months

Every 6 months

Annually

It is important that maintenance checks are recorded and that the schedule is 
always adhered to, in all cases, the previous report should be referred to.

Particular attention to the items mentioned below should be considered:

•

 Routine Maintenance.

•

 Any areas of corrosion should be treated and all areas of the unit 
should  be cleaned.

•

 Any drain trays should be cleaned and repaired if necessary.

•

 Check all access doors for leakage and if necessary,locks should be 
adjusted and any replacement gasket materials should be replaced as 
required.

•

 Check filters and change/clean if required.

•

 Check fin coil banks and heat exchangers. If necessary clean with a 
soft brush or vacuum. Also check for signs of contamination.

•

 Ensure condensate drains are cleaned clear and that water can flow 
feely from unit.

•

 Clean unit casting and ensure that any corrosion is addressed by 
treating.

•

 Ensure all locks and hinges are lubricated and adjusted as required.

•

 Check control dampers blades.

•

 Check operation of damper actuators and linkages and adjust as 
necessary.

•

 All electrical terminals within the unit should be tightened.

•

 Coil faces should be inspected and any dust removed.

•

 Thoroughly inspect the unit and its components for corrosion, acting 
immediately to treat/restore any damaged areas.

•

 Check all earth connections.

•

Check thermal wheel belt, motor, bearings, seals and if necessary 
clean with a soft brush or vacuum cleaner.

5 year warranty on ECOSMART models for peace of mind. The warranty starts 
from the day of delivery and includes parts and labour for the first year.
The remaining period covers replacement parts only. 
 
This warranty is void if the equipment is modified without authorisation, is 
incorrectly applied, misused, disassembled, or not installed, commissioned and 
maintained in accordance with the details contained in this manual and general 
good practice.  

If control software is modified or removed 

Nuaire will accept warranty on the hardware (unit) provided the replacement 
does not control the unit beyond its specified limits (refer to Nuaire testing 
standards and Application Guidance Notes document NA-QS-W029-3 which 
can be found on our website 

www.nuaire.co.uk

).

The product warranty applies to the UK mainland and in accordance with Clause 
14 of our Conditions of Sale. Customers purchasing from outside of the UK 
should contact Nuaire International Sales office for further details.

13.0 WARRANTY

14.0 SPARES & SERVICE ENQUIRIES

For technical assistance or further product information, including spare parts and 
replacement components, please contact the After Sales Department.

Telephone 02920 858 400 

TechnicalSupport@Nuaire.co.uk