background image

15

Leaflet Number 671366 July 2007

Installation and Maintenance

mrXbox90S Mechanical Ventilation with Heat Recovery

9.0 Routine maintenance

Routine maintenance is limited to periodically cleaning or replacing the

filters. The filter only has to be cleaned when that is indicated on

the display (it shows the text 

"FIL"

).

The filters must be replaced every year. It is not permitted to use the

appliance without filters.

1.  Switch off the appliance on the control panel 

and (simultaneously press keys 

"OK"

and 

"-"

during 3 seconds) Open the filter door.

2. Open the filter door and note how the filters are 

fitted into the unit, then remove the filters. The 

filters can be cleaned with a vacuum cleaner.

3.  Refit the filters back into the unit the same way 

they were taken out.

4. Close the filter door and switch on the unit on 

the control panel. (simultaneously press keys 

"OK"

and 

"+"

for 3 seconds).

5. After cleaning the filter or replacing with a new 

filter, the filter indication must be reset by 

pressing key 

"OK"

.

The display will blink for a moment to confirm 

that the filter has been reset.

The unit will return to operational mode.

10.0 Replacement of Parts

Should any component need replacing Nuaire keep extensive stocks 

for quick delivery. Ensure that the unit is electrically isolated, before

carrying out any work. 

When ordering spare parts, please quote the serial number of the unit

and the ARC number of the purchase if possible.

(This information will be available on the fan label).

11.0 Warranty

The 5 year warranty starts from the day of delivery and includes  

1 year parts and labour, with the remaining period parts only. This

warranty is conditional on planned maintenance being undertaken.

12.0 Service Enquiries

Nuaire can assist you in all aspects of service. Our service department

will be happy to provide any assistance required, initially by telephone

and If necessary arrange for an engineer to call.

Customer Services Department 

on 08705 002 555

-  RESET -

-  ON -

-  SET -

-  OFF -

F I  L

-  RESET -

-  ON -

-  SET -

-  OFF -

O  F  F  

-  RESET -

-  ON -

-  SET -

-  OFF -

2.  1  5  0  

Summary of Contents for mrXbox90S

















Reviews: