background image

5

5

Connections and application examples

USB power supply port 

The USB-port provides 5 V/1.0 A of power, allowing you 

to conveniently power various devices (e.g. smartphones) 

or wireless radio receivers directly from the A-100.  

This USB connector is power only, no audio!

The nuPro boxes must be completely wired before switching them on, see also our separate commissioning instructions.. 

 

The default setting of the nuPro software defines the left loudspeaker

of a stereo pair as master, the right one as slave. All settings of the 

loudspeakers are based on this assignment. 

The digital connection of the speakers enables their joint control. All 

settings are made on the left master speaker, and all source devices 

are also connected to this speaker. 

An active subwoofer can also be connected. Use the remote control 

to select from the input sources which of the connected devices you 

wish to listen to. 

Alternatively, you can configure and control both speakers indivi-

dually. For more information, see page 8 in the "SETUP" section.

EN 4/2020

 

· 

nuPro A-100

SPDIF inputs 

on the master speaker box

Source devices with electrical digital output

, e.g.

•  CD player

•  various network players

•  satellite receiver

•  various radio transmission systems

SPDIF input 

on the slave speaker box (right speaker): 

 

Connection to the link output of the  

nuPro master loudspeaker box

 

aux input 

master speaker  

(left speaker)

source device with  

analog line output 

 

 

i.e.:

 

-

CD-Players

 

-

Network players

 

-

Preamplifiers

 

-

AV-receivers

 

-

smartphones, tablets and MP3 players 

with 3.5 mm jack-connectors.

 

-

PC’s/laptops and TVs with  

3.5 mm jack-connectors

 

aux

in

in

in

out

sub

toslink

spdif

usb

L

L

link output 

on the master loud- 

speaker (left speaker)

:  

output to a slave- 

loudspeaker

SUB output 

Master loudspeaker 

Connection of an 

active  

subwoofer

USB input 

master speaker  

                       (left speaker)

Source device with USB port such 

as computer and laptop.

The nuPro loudspeaker functions as 

an external sound card. (See also  

the notes on page 6, section 

USB 

Connection to Computers

)

 

optical input TOSLINK 

  

Master loudspeaker (left speaker): 

Source devices with optical digital output 

e.g.

•  various network players  

   (e.g. Apple TV)

•  Bluetooth receiver

• TV

•  game console

link

R

Summary of Contents for nuPro A-100













Reviews: