45
Nucleus Freedom Speech Processor
To hear more environmental sound, press the Increase button.
To hear less environmental sound, press the Decrease button.
If you only want to hear the signal from the accessory, press
the Decrease button until the microphone sensitivity is
zero (0). This will switch off the external sounds received by
the microphone.
The balance between the amount of sound heard from the
accessory as compared with that heard from the speech
processor microphone will be set for each program when the
clinician establishes that program.
If the sound level is unsatisfactory when you are using
an accessory, ask your clinician to change it at your next
programming session. Alternatively your clinician may give you
different sound level options on different programs.
Accessories and the telecoil
When you are using an accessory with your speech
processor, it is possible to change to use the in-built telecoil
or the microphone only setting, with the accessory still
To adjust the sound level,
press either the Increase
or Decrease button. If not
pressed again within a short
time, the display will revert to
the program display.
N31018F Iss1D03textmas.indd 45
N31018F Iss1D03textmas.indd 45
24/05/2005 4:15:23 PM
24/05/2005 4:15:23 PM
