Version 3.0
NS070920
3
Start up:
Before plugging machine in please remove extra micron screens from under drum, please note we have pre loaded one screen on
drum and notate how we have lined up screen to insure no folds or wrinkles during use. Inspect how .. Once screen is properly fit
to drum it is ready to load as much as 2 pounds of material, notice the end of drum with loading door which has two thumb screws
for door securement. Once filled align drum drive side prongs into machine drive prongs “note this is inside left of side of unit”
and rest right side of drum on drive wheels. You are now ready to start unit. Plug unit into proper receptacle power and turn power
switch and light switch on located on front right side of NS Sifter. Once on you may now adjust rpm of spindle by adjusting up and
down arrows for proper rpm of your product. We recommend keeping rpm between 25%-40% for optimal usage for collection in
tray beneath drum.
unit operation
Summary of Contents for NS Sifter
Page 9: ...rosin made simple...
