25
25
G
B
6. Cleaning and storing
Warning!
To avoid the risk of electric
shock, injury or damage:
– take the plug out of the socket before
cleaning the device.
– allow the device to cool down before
cleaning it.
– never immerse bottle warmer
in
water.
Caution!
Under no circumstances use abrasive,
corrosive or scratching cleaning agents, as
these could damage the device.
6.1 Cleaning the device
1. Clean bottle warmer
You can also use a little detergent.
2. Wipe over with clean water.
3. The inner bottle warmer
should be wiped
out with a cloth after each use to prevent
significant limescale build-up.
4. Only use the device again when it is
completely dry.
6.2 Cleaning the accessories
1. Clean basket
and ring
by hand in the sink
or in a dishwasher.
2. Do not use the accessories again until they
are completely dry.
6.3 Descaling
After a period of use, limescale will build up in
the device (depending on the hardness of the
mains water where the device is being used).
You should remove this limescale at regular
intervals to guarantee the function of the device.
Limescale can cause performance to deteriorate
considerably.
Caution!
Do not use commercially available
descalers, pure acetic acid or vinegar essence.
1. To get rid of limescale, we recommend
pouring 100 ml of white vinegar and 100 ml
of boiling water into the device and leaving it
to take effect for 30 min.
Caution!
Longer periods will not improve
descaling but may damage the device in the
long term.
2. After this time, empty the device.
3. Rinse out twice with clean water.
4. Wipe dry the device.
6.4 Storing the device
• We recommend that you retain the packaging
of the device so that the device can be
packed securely if it needs transporting.
• To store the food warmer, clean the device
after use and assemble once completely dry.
• Store the device in a dry, cool place.
• Do not place any bottles or other items in the
bottle warmer
when the device is not being
used.
