Page 6
10/03/16
Patriot
®
45
INSPECTION
•
All parts should be washed in a clean solvent before they are inspected and
reassembled.
WARNING
USE CLEANING FLUIDS THAT ARE NONFLAMMABLE AND AVOID
BREATHING THE FLUID VAPORS.
•
Handle all parts carefully, hardened parts may chip if dropped on a hard surface.
BACKHEAD
•
Inspect the threads and pin hole for cracks and burrs.
•
Remove all burrs on the thread with a fine file.
•
Replace if necessary.
BACKHEAD BEARING
•
Check for gouges or irregularities.
•
Replace if necessary.
CHECK VALVE
•
The check valve should be smooth and free from abrasions.
•
Replace if necessary.
•
Replace the check valve spring if it is worn or broken.
FEED TUBE
•
Inspect the outside diameter for nicks, burrs and scoring.
•
Inspect all makeup surfaces for indentations or nicks caused by wear.
•
Remove all minor irregularities with emery cloth.
•
Replace if necessary.
Summary of Contents for Patriot 45
Page 2: ......