background image

CDN-34S

 

- The Leader in DJ Technology

©1999 Numark Industries

- 3 -

http://www.numark.com

115V

230V

WARNING: To reduce the risk of fire or electrical
shock, do not expose this appliance to rain or
moisture. Electrical equipment should NEVER be
kept or stored in damp environments.

DANGER:  INVISIBLE LASER RADIATION WHEN

OPEN AND INTERLOCK FAILED OR DEFEATED.
AVOID DIRECT EXPOSURE TO BEAM.

CAUTION:   This product utilizes a laser.  Use of

controls or adjustments other than those
specified herein may result in hazardous
radiation exposure.

NOTICE CONCERNING FCC REGULATIONS

This equipment generates and uses radio frequency
energy and may cause interference to radio and
television reception if you do not operate it in strict
accordance with the procedures detailed in this
OPERATING MANUAL.
This unit complies with Class B computing device rules
in accordance with the specifications in Sub-part J or
Part 15 of the FCC Rules, which are designed to provide
reasonable protection against such interference in a
residential installation.  There is no guarantee, however,
that interference will not occur in a particular installation.
If the unit does cause interference to any radio or
television reception, try to reduce it by one or more of
the following means:

a) Reposition the other unit and/or its antennae
b) Move this unit
c) Move this unit and the other unit(s) further apart
d) Plug this unit into a different AC outlet so that it is
on a different circuit from the other equipment.

This note is in accordance with Section 15.838 of the
FCC Rules.

This unit does not exceed the Class B limits for
radio noise emission from digital apparatus set out
in the radio interference regulations of the
Canadian Department of Communications.

DOUBLE INSULATED - When servicing use only identical replacement parts

For 220-volt use in USA, use NEMA style 220-volt plug.  For other countries use proper plug for local outlet.

LINE VOLTAGE SELECTION
1) The desired voltage may be set with the VOLTAGE SELECTOR  switch  on the

rear panel of the main unit, using a screwdriver.

2) Do not twist the VOLTAGE SELECTOR switch with excessive force as this may

cause damage.

3) If the VOLTAGE SELECTOR switch does not move smoothly contact a qualified serviceman.

Please record the serial number of your unit as shown on the back of the chassis as well as the
name of the dealer from whom you purchased the unit.  Retain this information and your original
purchase receipt for your records.  Please return the enclosed warranty card to register your CD
player with us.

MODEL: ___________________________

PURCHASED FROM: ________________________

SERIAL NUMBER: __________________

DATE OF PURCHASE: _______________________

SERVICE INSTRUCTIONS

 

Disconnect power cord before servicing

 

Replace critical components 

  only

with factory parts or recommended
equivalents

 

For AC line powered units - Before
returning repaired unit to user, use an
ohmmeter to measure from both AC plug
blades to all exposed metallic parts.  The
resistance should be no more than
100,000ohms.

Summary of Contents for CDN-34S





















Reviews: