background image

 

®

 

Professional Disc Jockey Products 

 

LIMITED PRODUCT WARRANTY 

 
1.

 

What is covered and for how long?  NUMARK INDUSTRIES LCC ("NUMARK") warrants to the original purchaser that NUMARK'S DJ Mixers, Amplifiers, CD 
players, turntables, preamplifiers, beatkeepers, equalizers, microphones, headphones, and all other accessories are free from defects in material and 
workmanship under normal use and service for the period commencing upon the date of purchase from an authorized NUMARK dealer and continuing for the 
following period of time after that date for (1) Year.   

2.

 

What is not covered?  This Limited Warranty is conditioned upon proper use of the product by the purchaser.   
This Limited Warranty does not cover:  (a) defects or damage resulting from accident, misuse, abuse, neglect, unusual physical or electrical stress, modification 
of any part of the product, or cosmetic damage; (b) equipment that has the serial number removed or made illegible; (c) all plastic surfaces and other externally 
exposed parts that are scratched or damaged due to normal use; (d) defects or damage from improper testing, operation, maintenance, installation, adjustment, 
or service of the mixers; (e) crossfaders. 

3.

 

What are NUMARK'S obligations?  During the applicable warranty period, NUMARK will repair or replace, at NUMARK'S sole discretion, without charge to the 
purchaser, any defective component part of the mixer.  To obtain service under this Limited Warranty, purchaser must first contact NUMARK and obtain a return 
authorization number ("RA#").  Purchaser must then return the mixer to NUMARK in an adequate container for shipping, accompanied by purchaser's sales 
receipt or comparable proof of sale showing the date of purchase, the serial number of the product, and the seller's name and address.  To obtain an RA# and 
assistance on where to return the mixer, contact NUMARK customer service at 401-295 9000.  Upon receipt, NUMARK will repair or replace the defective 
products.  NUMARK may, at NUMARK'S sole discretion, use rebuilt, reconditioned, or new parts or components when repairing any product or replace a 
product with a rebuilt, reconditioned or new product.  Repaired mixers will be warranted for a period equal to the remainder of the original Limited Warranty on 
the original mixer or for (90) days, whichever is longer.  All replaced parts, components, boards and equipment become the property of NUMARK.  If NUMARK 
determines that any mixer is not covered by this Limited Warranty, purchaser must pay all parts, shipping, and labor charges for the repair or return of such 
mixer. 

4.

 

What are the limits on NUMARK'S liabilities?  THE WARRANTIES GIVEN IN THIS LIMITED WARRANTY, TOGETHER WITH ANY IMPLIED WARRANTIES 
COVERING NUMARK MIXERS, INCLUDING WITHOUT LIMITATION ANY WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR 
PURPOSE, ARE LIMITED TO THE DURATION OF THIS LIMITED WARRANTY.   EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, NUMARK 
SHALL NOT BE LIABLE FOR ANY SPECIAL, INCIDENTAL, CONSEQUENTIAL, INDIRECT OR SIMILAR DAMAGES, LOSS OF PROFITS, DAMAGES TO 
PURCHASER'S PROPERTY, OR INJURY TO PURCHASER OR OTHERS ARISING OUT OF THE USE, MISUSE OR INABILITY TO USE ANY NUMARK 
MIXER, BREACH OF WARRANTY, OR NEGLIGENCE, INCLUDING BUT NOT LIMITED TO NUMARK'S OWN NEGLIGENCE, EVEN IF NUMARK OR ITS 
AGENT HAS BEEN ADVISED OF SUCH DAMAGES, OR FOR ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER PARTY.  THIS LIMITED 
WARRANTY IS THE COMPLETE WARRANTY FOR NUMARK'S MIXERS, AND IS GIVEN IN LIEU OF ALL OTHER EXPRESS WARRANTIES.  THIS 
LIMITED WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE ORIGINAL PURCHASER OF THIS PRODUCT AND STATES PURCHASER'S 
EXCLUSIVE REMEDY.  IF ANY PORTION OF THIS LIMITED WARRANTY IS ILLEGAL OR UNENFORCEABLE BY REASON OF ANY LAW, SUCH PARTIAL 
ILLEGALITY OR UNENFORCEABILTY SHALL NOT AFFECT THE ENFORCEABILITY OF THE REMAINDER OF THIS LIMITED WARRANTY WHICH 
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS THE LAW PERMITS. 
This Limited Warranty allocates risk of product failure between purchaser and NUMARK, and NUMARK'S product pricing reflects this allocation of risk and the 
limitations of liability contained in this Limited Warranty.  The agents, employees, distributors, and dealers of NUMARK are not authorized to make modifications 
to this Limited Warranty, or make additional warranties binding on NUMARK.  Accordingly, additional statements such as dealer advertising or presentation, 
whether oral or written, do not constitute warranties by NUMARK and should not be relied upon. 

5.

 

How does state law apply to this warranty?  SOME STATES DO NOT ALLOW THE EXCLUSION OR LIMITATIONS OF INCIDENTAL OR CONSEQUENTIAL 
DAMAGES OR HOW LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO PURCHASER. 

6.

 

This Limited Warranty gives you specific legal rights.  You may also have other rights, which vary from one jurisdiction to another.  

 

RETURN INFORMATION

 

 

A Return Authorization number must be obtained from Numark through the address or phone numbers below.    

 

A copy of the original sales receipt must also be included for the equipment to be repaired under warranty. 

 

The faulty equipment must be packed in its original packaging.  

 

One additional outer layer of packaging must be included to ensure product safety.  Failures to do so may inadequately protect the equipment in transit 
and, therefore, jeopardize the customer’s warranty.   

 

Numark will not accept COD shipments and no call tags will be issued for merchandise return.   

 

Numark will not return repaired merchandise to customers by priority service, unless by written request at the customer’s cost.  Requests must be 
submitted in writing with merchandise returned. 

 

The defective Numark equipment should be sent, FREIGHT PREPAID with Return Authorization number clearly printed on the outer packaging and 
original sales receipt enclosed to: 

 

 INDUSTRIES 

Attention: Service Department 
11 Helmsman Avenue 
North Kingstown, RI  02852 USA 

 

 
Phone:   +1 (401) 295-9000 
Fax: 

+1 (401) 295-5200 

Web: www.numark.com

 

 

Summary of Contents for CDN 36





















Reviews: