Numark PT-01, User Manual

 3 

Features 

1.

Platter – 

Place your record here. 

2.

45 RPM Adapter Holder

–

 Holds the 

included 45 RPM adapter. When not 
using the adapter, please place it in 
this holder. 

3.

Tonearm –

 The fixed tonearm can be 

raised and lowered by hand, or by 
pressing the raise / lower lever.  

4.

Arm Clip – 

This specially designed arm 

clip secures the tonearm while at rest 
or when not in use. The arm clip has 
been designed to remain in the up 
position while unlocked.  

5.

Raise / Lower Lever – 

Raises and 

lowers the tonearm. 

6.

33 / 45 / 78 Switch – 

This switch 

controls the RPM of the turntable platter. 

Note:

 For best results when playing 78 RPM vinyl 

records, use a 78 stylus (sold separately). Only use a 
78 stylus with 78 RPM vinyl records.  

7.

Autostop switch

– 

This switch turns autostop on or 

off. When autostop is on, the platter will start spinning 
when the tonearm is placed over the record and stop 
spinning when the record has reached the end. (When 
autostop is off, the platter will always spin regardless of 
the position of the tonearm.)  

Note:

 If your vinyl record stops before it reaches the 

end of the music, turn Autostop to the off position for 
this particular record. This is generally recommended 
for 45 RPM records. 

8.

Volume/Power Knob –

 To power on PT01 Touring, 

turn this knob clockwise until it clicks. When powered on, use 
this knob to adjust the volume. To turn off PT01 Touring, turn 
this knob counterclockwise until it clicks. 

9.

Headphone Output – 

Connect headphones here (sold 

separately) to listen to your vinyl.

10.

Battery Charging Indicator –

 The LED will illuminate when 

charging the battery. The LED will turn off once the battery is 
fully charged.  

11.

Power Indicator – 

This

LED illuminates when the power is on and goes out when the battery power is 

depleted. 

12.

Speaker –

 The record's audio will be played through this built-in speaker.

13.

Aux Input

– 

Connect a CD player, digital media player, or other audio source to this 1/8” stereo 

auxiliary input.  

14.

RCA Output*

– 

The audio from a playing vinyl record is sent to this

line-level coaxial audio output. This 

must not be connected to phono level devices.  

15.

USB Port –

 Use the included USB cable to connect your turntable to your computer. The USB 

connection will send audio from the turntable to your computer. Please see the 

Using PT01 Touring 

With Your Computer

 section of this manual for information. Also, use the included USB cable to 

connect PT01 Touring to a USB power adapter connected to a power outlet or your computer.  

IMPORTANT: 

Remove the plastic cartridge 

cover (needle cover) before operating the 
turntable.

*WARNING:

 The RCA outputs are LINE 

level. Please only connect these to LINE 
level inputs. You may damage your receiver 
if you plug in a LINE level device into a 
PHONO level input. 

IMPORTANT: 

Place the included felt slipmat 

on the platter; then place your record on the 
felt slipmat to carefully hold your records. 

R

L

14

15

AUX

USB 

          OUT

1

12

12

10

11

9

8

5

6

7

4

3

2

13

TOURING