8
14.
Loop In
- is the point where you wish the loop to start. A loop is any area of a CD that you choose
to repeat seamlessly. The initial “CUE” or “PLAY” point of the CD is by default the “Loop In” point.
If you wish to set a new loop-in point, just press “Loop In” while the CD is playing when it reaches
the desired point. The “Loop In” button will light indicating a new loop is set. The “Reloop/Stutter”
button will also illuminate indicating a point has been set and is accessible for “Stutter”.
The unit
will always remember a point until you set a new point or put in a new CD. The new point will be
accessible until you remove the CD from the unit. If you change tracks and you previously set a
“Loop In” on another track, pressing “Reloop”
will jump to that point.
Press “LOOP IN” Press “RELOOP”
Set “HOT” point Start from “HOT” point again
Position on CD
STUTTER interval
Return to “LOOP IN”
If you wish to change the loop-in point, just press “Loop In” again.
1
st
Press 2
nd
Press Press
“LOOP IN” “LOOP IN” “LOOP OUT”
“LOOP IN” point New “LOOP IN” point 1
st
press starts looping
and “HOT” point set and “HOT” point set 2
nd
press releases loop and continues play
Position on CD
First LOOP interval
Second LOOP interval
Return to second “LOOP IN” point
Return to first “LOOP IN” point
15.
Loop Out
- sets the end point of the loop. The first time you press “Loop Out” while a CD is in play
mode, the “Loop Out” button will turn on and flash while the song automatically returns to the “Loop
In” point with no breaks and continues to play. When the song reaches the “Loop Out” point again,
it jumps to the “Loop In” point and continues to repeat this action. You will notice the “Loop In”
button will also be flashing during loop action. To release, or end the loop, press “Loop Out” a
second time and play will continue forward when the song passes the previously set “Loop Out”
point. The “Loop Out” button will be lit solid indicating that the loop is now in memory for “Reloop”
purposes. The “Loop Out” point will be erased if “Loop In” is pressed or a new “Cue” point is set
after the “Loop Out” point. This is important because without this point, “Reloop” will not be
possible.
Press 2
nd
Press 1
st
Press 3
rd
Press
“LOOP IN” “LOOP OUT” “LOOP OUT” “LOOP OUT”
“LOOP IN” point Releases looping Starts looping Starts new loop
and “HOT” point set and continues play
First LOOP interval
Second LOOP interval
Return of first LOOP
Return of second loop
Summary of Contents for X2
Page 2: ......
