20
ALWAYS ENSURE THAT THE MACHINE IS ON LEVEL GROUND
BEFORE DISENGAGING BRAKE ARM.
NEVER DISENGAGE THE BRAKE WHEN THE MACHINE IS ON A SLOPE / GRADIENT.
!
!
The CRO 8055 is equipped with a free-wheel function that will enable the operator to move the machine.
When the brake is disengaged the machine is in Free-wheel mode and has no braking
facility. Care must be taken when moving the machine in Free-wheel mode.
!
!
The Free-wheel lever can be found on the right hand side of the rear axle (Fig.58).
To disengage the brake, pull the lever into the down position (Fig.59).
Re-engage the brake by moving the lever into the up position.
To ensure your machine remains at its maximum efficiency and prolong your battery life, please follow the
simple steps below:
Under normal daily usage:
Recharge batteries after each use regardless of machine operation time.
Recharge the machine fully after its last use.
Do not leave the machine in a discharged state.
58
59
Free-wheel Function
Battery Care
Summary of Contents for CRO 8055/100T
Page 27: ...27...
