233936 Page 38 04/12 (A02)
Emptying the waste water
Cleaning the machine
You can empty the waste water tank by using the dump
hose attached to the rear of the machine
(Fig 38).
The waste water tank can also be removed and carried
using the handle to a suitable waste disposal area and
emptied (Fig 39).
Follow the national guide lines when disposing of chemi-
cals. (COSHH) see page 11
Caution.
The solution tube will be under pressure, switch off the pump and operate the trigger to
release the pressure in the system BEFORE removing the solution tube from the
machine.
5HPRYLQJWKHZDQGVDQGÀRRUWRRO
Unclip the solution tube from the machine see NOTE above.
Remove the wands, floor-tool (Fig 40)
and hose assembly from the machine (Fig 41).
&OHDQLQJWKHWDQNV¿OWHUVDQGKRVHV
To keep your NUMATIC machine in pristine condition
Clean all filters and tanks regularly.
Remove the waste tank vacuum filter
(Fig 42) and clean.
Fig 38
Fig 39
Fig 40
Fig 41
Fig 42
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
e
Fig 40
