8
www.numatic.co.uk
NOTE: Great care must be taken to ensure that contaminants (leaves, hair, dirt, etc.) are not allowed to enter the clean water
tank during the filling process. If using a bucket or similar, ensure it is always clean and free from debris.
When filling the clean water tank, do not fill
above the clean water tank emptying hose
retaining clip.
This can be found at the rear of
the machine.
Machine Set-up Guide
Always ensure that the machine is switched off before making any adjustments.
!
!
Filling the Clean Water Tank
The
TGB
2120
/
2128
is equipped with a large capacity 80 litre clean water tank, allowing for large areas to be covered in a single fill.
10
Fill Level Indicator
If you need to access the batteries, make sure that the
waste water tank is empty before lifting.
!
!
To fill clean water tank extend fill hose.
Remove rubber seal and fill.
Alternatively remove filler cap completely.
