Guide Canicom GPS
–
Indice B
24/84
To
switch your collar off
, press and hold the on/off button again : the collar vibrates once (for quite
a long time) and the two LEDs on the front light up at the same time, then go off.
Your collar is off.
▪
Switching the handheld on/off
Tip
:
Do not switch your handheld on inside a building or home. Go outside and choose a clear area. Do
not stand under any trees or dense foliage or in a place where satellite signals could be blocked by
large obstacles (blocks of flats, ravines, etc.).
To
switch your handheld on
, simply press and hold the on/off button
on the handheld until the
screen lights up and you see the NUM’A
XES logo appear. The handheld vibrates 3 times in rapid
succession:
it is now working
.
To switch your handheld off, repeat the same operation and hold down the on/off button
until the
handheld's screen turns off. It vibrates once (for quite a long time):
your handheld is off.
Starting the geolocation system
✓
Step No. 1: Calibrate the electronic compass (if the handheld asks you
)
Turn your handheld on: a message is displayed: the compass has to be calibrated.
Press the
key (in the top left) to calibrate your handheld.
Follow the instructions displayed on the screen:
❺
Press the
key
“ calibrate”
