12
■ Cover screw threads or similar parts of the target object.
■ It is advisable to test the spray gun on cardboard or a similar surface to find the
correct setting.
Important: Begin spraying outside of the target area and avoid interruptions inside
the target area.
■ Correct (Fig. 6a). Be sure to hold the spray gun at an even distance of approx. 10 –
30 cm to the target object.
■ Incorrect (Fig. 6b) Heavy spray fog build-up, uneven surface quality.
■ Move the spray gun evenly cross-wise or up-and-down, depending on the spray
pattern setting.
■ An even movement of the spray gun results in an even surface quality.
■ When coating material builds up on the nozzle (A) and air cap (B) (Fig. 7), clean both
parts with a solvent or water.
Interruption of Work till 4 Hours
■ Turn the machine off.
■ When processing 2-component varnishes, clean the device immediately.
Taking Out of Operation and Cleaning
Proper cleaning is the prerequisite for problem-free operation of the paint application
device. No warranty claims are accepted in case of improper or no cleaning.
FIG.7
B
A
Spray Technique
