DSP LASER AP with MCS
For the operation, it is necessary that MCS transmits and receives some simple ON/OFF
information to/from CNC and to/from the press brake (Figure 5).
For this purpose, some digital I/O are available, not regarding the safety, whose state will be
then ON /OFF. It is even possible, but not necessary, that some of these data are
transmitted via serial port RS232.
Interface MCS - Operator
MCS manages a great number of signals and executes different machine functions. Then,
an interface is necessary with the personnel devoted to its installation during the
construction of the machine and with the personnel which then will use it.
The module has two types of interface towards the external world (Figure 6). The first
interface is realized with:
•
LEDs showing the I/O states.
•
Alpha-numeric display showing messages and data regarding the operation of the
system and of the machine.
•
Keys for the selection of the operation options.
Figure 6
The second interface is realized by the CNC display. The data and the messages to display
are processed by CNC depending on the signals coming from MCS through the serial port.
DISPLAY
RS
232
M
C
S
KEYS
LED
CNC
12
DLAM01EN
Summary of Contents for DSP LASER AP
Page 2: ......
Page 4: ......
Page 50: ...DSP LASER AP with MCS Figure 34 44 DLAM01EN...
