conformément aux réglementations (codes) fédérales, provinciales et locales en
vigueur pour les systèmes hydrauliques comprenant des dispositifs anti-reflux.
C'est pourquoi les branchements hydrauliques doivent être effectués par un tech-
nicien qualifié. La garantie est annulée si les caractéristiques de l'alimentation
électrique ne correspondent pas aux données figurant sur la plaque signalétique.
•
Durant l’installation du dispositif, utiliser les composants et les matériaux four-
nis en dotation avec le dispositif. Si l’utilisation de composants supplémentaires
s’avère nécessaire, l’installateur doit vérifier l’adéquation de ces derniers pour un
emploi au contact de l’eau pour la consommation humaine. L'installateur doit
effectuer les branchements hydrauliques en respectant les normes d'hygiène et
de sécurité hydraulique de protection de l'environnement en vigueur dans le lieu
d'installation. Il faut donc que l'installation hydraulique soit réalisée par un tech-
nicien autorisé. Lors du raccordement au réseau de distribution d'eau, toujours
utiliser un nouveau tuyau fourni, les anciens tuyaux ne doivent pas être utilisés.
•
Un dispositif de déconnexion, doté d’une séparation des contacts à tous les
pôles fournissant une déconnexion complète dans la catégorie de surtension III,
est incorporé dans le câblage fixe conformément aux normes de câblage.
•
Pour les marchés australien et néo-zélandais, le sectionnement est incorporé
dans le câblage fixe et est conforme à la norme AS/NZS 3000
•
En cas d'installation dans les cuisines, raccorder le conducteur d'équipotentiali-
té à la borne de la machine indiquée par le symbole .
•
Le symbole de mise à la terre est présent dans la
partie postérieure de la machine.
•
Le fabricant ne pourra en aucun cas être retenu
responsable des éventuels dommages causés par
une absence de mise à la terre de l’installation.
Pour la sécurité électrique de cet appareil, il est
obligatoire de prévoir une installation de mise à
la terre, en s’adressant à un électricien qualifié et
dûment autorisé à cet effet, afin qu’il vérifie que la
portée électrique de l’installation soit appropriée
à la puissance maximum de l’appareil indiquée
sur la plaquette.
•
L’utilisation de tout appareil électrique entraîne le respect de certaines règles
fondamentales. Et notamment:
•
Ne pas toucher l’appareil avec les mains ou les pieds mouillés ou humides;
•
Ne pas utiliser l’appareil pieds nus;
•
Ne pas employer de rallonges dans les salles de bain ou les douches;
•
Ne pas tirer sur le cordon électrique pour débrancher l'appareil du réseau d'alimentation;
•
Ne laissez pas l’appareil exposé aux agents atmosphériques (pluie, soleil, etc..);
•
Ne permettez
pas l’utilisation de l’appareil de la part d’enfants ou de personnes
non autorisées et n’ayant pas lu ni bien compris le contenu de ce manuel.
•
En particulier, l’électricien devra s’assurer que la section des câbles de l’installa-
tion soit bien adaptée à la puissance absorbée de l'appareil.
•
Il est interdit d'utiliser des adaptateurs, des prises multiples et des rallonges. Si
leur usage s’avère indispensable, il faut absolument s’adresser à un électricien dû-
ment autorisé à cet effet.
•
Afin d’éviter des surchauffes dangereuses, il est conseillé de bien dérouler sur
toute la longueur le câble d’alimentation.
19
Summary of Contents for APPIA life 1 Group
