4
ENGLISH
INSTALLATION
Warning / Safety Instructions
Installation
Operation
Care and Cleaning / Storage
Troubleshooting
Service Center
One Year Limited Warranty
To reduce the risk of electric shock, if the machine has a polarized UL approved plug (one blade is
wider than the other), this plug will fit in a polarized outlet only one way. If the plug does not fit fully
in the outlet, reverse the plug. If it still does not fit, contact a qualified electrician to install the proper
outlet. Please do not change the plug in any way. If the supply cord is damaged, it must be replaced by
the manufacturer, its service agent or similarly qualified person in order to avoid a hazard.
As pictured, attach the cooling holder to the dedicated slots located in the back section of the lamina-
tor. (FIGURE 1)
Maximum feeding width of 9” (23 cm)
Laminates up to a maximum thickness of 0.02” (0.5 mm)
Accepts pouches up to a max. thickness of 3-5 mil (80-125 microns)
Voltage: 120v~60Hz / 2.2A
FIGURE 1
Summary of Contents for LM992HC
Page 2: ......
