Compact Trigger Sprayer
● Point Sprayer at target and pull Trigger to begin misting of chemical solution. There
may be a short delay of mist output when first operating while Sprayer builds up
pressure. After enough pressure is built into the system the chemical solution will
begin to be released from the Sprayer.
● Do not over-apply:
○ Do not put the Sprayer too close to the target.
○ Do not keep the Sprayer pointed on one specific target for more than
approximately one (1) second.
○ Move the Sprayer in a smooth pattern over the target area(s).
○ If you see visible droplets on the target this is generally a sign that too
much chemical solution is being misted onto that target.
● After use, unscrew the Tank by turning it clockwise to relieve the pressure from the
Tank. Raise the Liquid Straw above the Tank and pull the Trigger, allowing the
remaining chemical solution to come out of the Liquid Straw and into the Tank.
● After usage clean the unit by placing clean water in the Tank and turning on the
Sprayer, allowing the water to purge the unit of any chemical solution for two (2)
minutes.
● Store the Sprayer indoors and out of reach of children. Keep the Sprayer upright
when liquid is in the Tank. Failing to do so can cause liquid to reach the motor and
possibly damage the Sprayer.
8
Summary of Contents for FOG-001
Page 3: ...Compact Trigger Sprayer 3 ...