9
12. INSTALL THE DECORATIVE FLUE (
CONTINUED
)
D
UCTED
INSTALLATION
:
Slide up the upper flue until it is aligned with its mounting bracket. The bracket must be inside
the flue. Secure the upper flue to its bracket using 2 M4 x 12 Phillips round head screws.
NOTE: Duct not shown in illustration to ease understanding.
Remove protective plastic film covering the upper flue and the hood.
HO0295
U
PPER
FLUE
MOUNTING
BRACKET
F
RONT
VIEW
U
PPER
FLUE
13. REINSTALL GREASE FILTER(S)
A
LL
INSTALLATIONS
:
To reinstall the grease filters, align rear filter tabs with slots in the hood. Pull
down the metal latch tab, push each filter into position and release. Make
sure filters are securely engaged after installation.
HD1161
HA0145
A
B
HO0293
N
ON
-
DUCTED
INSTALLATION
:
Slide up the upper flue until it is aligned with the plenum. Secure the upper flue to the
plenum using 2 M4 x 12 Phillips round head screws.
Remove protective plastic film covering the upper flue and the hood.
N
ON
-
DUCTED
INSTALLATION
:
Install a charcoal filter (included in the non-duct kit) on each aluminum grease
filter back (
A
). Hold the charcoal filter in place by inserting both ends of
3 metal strips (included in the non-duct kit) in each aluminum grease filter
frame (
B
).
